自動感應門可以說是我們比較常見的一種門了，自動感應門雖然好用，但是使用時還是有些地方需要我們?nèi)プ⒁獾?，接下?a href="http://radiefmail.com">濟南感應門小編為大家分享幾個自動感應門適用時的一些常識。

The automatic induction door can be said to be a common door. Although the automatic induction door is easy to use, there are still some places we need to pay attention to when using it. Next, the Jinan Induction Door will share some common sense about the application of the automatic induction door.

1、工作人員一切正常速率從門口或門里邁向自動感應門，自動感應門開門機全自動點開，賓館自動感應門的行為應當光滑并且并沒有產生相碰的狀況；自動感應門點開后，工作人員以一切正常速率利用感應門時，自動感應門應當保證點開情況。

1. The staff shall move towards the automatic induction door from the door or inside the door at all normal speeds. The automatic induction door opener will open automatically. The automatic induction door of the hotel shall be smooth and free from collision; After the automatic induction door is clicked open, when the staff uses the induction door at all normal speeds, the automatic induction door shall ensure the click open condition.

2、當工作人員脫離自動感應門傳感器感應區后，在延遲1-10秒后（時長長度能夠由處于被動紅外感應器來設定），自動感應門將全自動關上，自動感應門的運行應當光滑并且并沒有產生相碰的狀況。

2. When the staff leaves the sensing area of the automatic sensing door sensor, after a delay of 1-10 seconds (the length of time can be set by the passive infrared sensor), the automatic sensing door will automatically close, and the operation of the automatic sensing door should be smooth without collision.

3、觀察一切正常利用自動感應門的行進路線，須把平時行進路線調節為工作人員正對著邁向自動感應門，而不是以相應的視角邁向自動感應門。

3. Observe all the travel routes that normally use the automatic induction door, and adjust the normal travel route to that the staff is facing the automatic induction door, rather than moving towards the automatic induction door from a corresponding perspective.

4、邁向自動感應門時，自動門微波感應開關的感應總寬區域應當超過門充分點開的總寬。

4. When moving towards the automatic induction door, the total induction width of the microwave induction switch of the automatic door should exceed the total width of the fully opened door.

5、自動平移門的控制板，都具有全自動逆向作用的流程：

5. The control panel of the automatic sliding door has the process of fully automatic reverse action:

無論打開或關流程中，當門扇健身運動大方向上阻礙物體驗或人時，門體驗全自動向反之大方向健身運動。這是一個比較主要的可靠、保障作用，在預防碰人或物的另外，保障自動感應門開門機不容易因負載而燒毀。

No matter in the process of opening or closing, when the door leaf hinders the experience of objects or people in the general direction of fitness, the door experience will automatically exercise in the opposite direction. This is a major safety, reliability and guarantee function. In addition to preventing people or objects from being touched, it ensures that the automatic induction door opener is not easy to be burned due to load.

隨后，門扇在退還時全自動程序執行時，不可以有其他信號干擾，不然，微控制器將再次程序執行。假如較長時間沒能恢復過來，就會產生問題或作用出現異常。

Then, when the door leaf is returned to the fully automatic program, no other signal interference is allowed, otherwise, the microcontroller will execute the program again. If it fails to recover for a long time, it will cause problems or abnormal effects.

6、在利用工作人員的數目不足的自然環境中，紅外線防夾傳感器身為作用來預防碰和夾人，但在大工作人員數據流量的公共區域，作用應當獨特考量。

6. In the natural environment where the number of staff is insufficient, the infrared anti pinch sensor is used as a safety function to prevent collision and clamping. However, in the public area with large staff data flow, the safety role should be considered uniquely.

此外發現異常聲響和問題時，勿隨便組裝，請及時斷電并與工程師聯絡。自動感應門路軌及吊滑輪不可以上油；不然支架上的滾軸有拖動狀況，使門產生相碰。更多相關內容就來我們網站http://radiefmail.com咨詢了解吧。

In addition, in case of abnormal noise and problems, do not assemble them randomly. Please cut off the power and contact the engineer in time. The track and lifting pulley of automatic induction door shall not be oiled; Otherwise, the rollers on the bracket are dragging, causing the doors to collide. More relevant content will come to our website http://radiefmail.com Ask and understand.