High compartment transparency, while pursuing the dual advantages of visual effect and functional application. Built in aluminum magnesium louvers, open to show a transparent and bright office corridor; When closed, create a private personal office space, provide people with an ideal environment, and make the office environment contain different ideas and emotions. This is the main reason why high cubicles can develop rapidly in office decoration. But high compartment maintenance is also very necessary. This is more conducive to play the role of high compartment!

高隔間所有的辦公隔斷產品都符合以下保養(yǎng)方式。

All office partition products in high compartment comply with the following maintenance methods.

1、勿以利器在高隔間墻體表面直接切、割、敲打、以免在表面留下刮痕、裂痕及溝孔。

1. Do not directly cut, cut or knock on the wall surface of high compartment with sharp tools, so as to avoid leaving scratches, cracks and groove holes on the surface.

2、除布面板外其余標準面板均可清洗，清洗時不要選用有磨料、強酸成份的清潔劑，以免損傷表面。

2. Except cloth panels, other standard panels can be cleaned. Do not use cleaning agents with abrasive and strong acid components to avoid damaging the surface.

3、臟污——清理建議要或減少臟污，請使用清潔劑，或其它溫和的清潔劑清潔，以微濕的軟布吸干清潔劑，然后再以水清洗。

3. Dirt cleaning: it is recommended to remove or reduce dirt. Please clean with full-effect cleaner or other mild cleaner, dry the cleaner with a slightly wet soft cloth, and then wash with water.

4、膠條是保證斯唯鋁合金玻璃隔斷密封，隔音和防水的關鍵，如有脫落要及時修補，更換。

4. The adhesive strip is the key to ensure the sealing, sound insulation and waterproof of Svay aluminum alloy glass partition. If it falls off, it shall be repaired and replaced in time.

5、可用軟布沾清水或中性洗滌劑擦拭，不能用普通肥皂和洗衣粉，更不能用去污粉、洗廁精等強酸堿的清潔劑。

5. It can be wiped with soft cloth stained with water or neutral detergent, not with ordinary soap and washing powder, nor with strong acid-base cleaners such as decontamination powder and toilet detergent.

6、高隔間的門在使用過程中，應輕推輕拉，推拉順其自然;

6. The door of high compartment shall be gently pushed and pulled during use, and the push and pull shall be natural;

7、高隔間積灰，變形是鋁合金隔斷老化的主要原因，要保持鋁合金清潔，特別是拼接縫的清潔?？捎梦鼔m器吸去槽內和膠條的積灰

7. Ash accumulation and deformation in high compartment are the main reasons for the aging of aluminum alloy partition. Keep the aluminum alloy clean, especially the joint. The dust in the groove and the rubber strip can be sucked with a vacuum cleaner